|
| MOQ: | 1 piece |
| Standard Packaging: | 10pcs/plastic bag, 500pcs/carton |
| Delivery Period: | Within 1-3 work days |
| Payment Method: | L/C, T/T, Western Union,Credit Card |
| Supply Capacity: | 10,000 pcs per month |
10Gbps SFP+ RJ45 Copper Electrical Transceiver 10Gbase-T Copper Module 30m
Description
SFP+-10GBASE-T-RM Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T/ 5Gbase-T /2.5Gbase-T/1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC will be changed to low-power state.
Features
Cable Length
| Link Port | Cable | Reach | Host Port |
| 10Gbase-T | CAT6A | 30m | 10GBase-R |
| 5Gbase-T | CAT5E | 50m | 10GBase-R |
| 2.5Gbase-T | CAT5E | 50m | 10GBase-R |
| 1000base-T | CAT5E | 100m | 10GBase-R |
| 100base-T | CAT5E | 100m | 10GBase-R |
+3.3V Volt Electrical Power Interface
The SFP+-10GBASE-T has an input voltage range of 3.3 V +/- 5%. The 4V maximum voltage is not allowed for continuous operation.
|
+3.3 Volt Electrical Power Interface |
||||||
| Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions |
| Supply Current | Is | 900 | 1100 | mA |
3.6W max power over full range of voltage and temperature. See caution note below |
|
| Input Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | Referenced to GND |
| Maximum Voltage | Vmax | 4 | V | |||
| Surge Current | Isurge | TBD | mA | Hot plug above steady state current. See caution note below | ||
Caution: Power consumption and surge current are higher than the specified values in the SFP MSA
Product Pictures
Outline Dimensions (mm)
Compatibility
Certificates
FAQ
|
|
| MOQ: | 1 piece |
| Standard Packaging: | 10pcs/plastic bag, 500pcs/carton |
| Delivery Period: | Within 1-3 work days |
| Payment Method: | L/C, T/T, Western Union,Credit Card |
| Supply Capacity: | 10,000 pcs per month |
10Gbps SFP+ RJ45 Copper Electrical Transceiver 10Gbase-T Copper Module 30m
Description
SFP+-10GBASE-T-RM Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T/ 5Gbase-T /2.5Gbase-T/1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC will be changed to low-power state.
Features
Cable Length
| Link Port | Cable | Reach | Host Port |
| 10Gbase-T | CAT6A | 30m | 10GBase-R |
| 5Gbase-T | CAT5E | 50m | 10GBase-R |
| 2.5Gbase-T | CAT5E | 50m | 10GBase-R |
| 1000base-T | CAT5E | 100m | 10GBase-R |
| 100base-T | CAT5E | 100m | 10GBase-R |
+3.3V Volt Electrical Power Interface
The SFP+-10GBASE-T has an input voltage range of 3.3 V +/- 5%. The 4V maximum voltage is not allowed for continuous operation.
|
+3.3 Volt Electrical Power Interface |
||||||
| Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions |
| Supply Current | Is | 900 | 1100 | mA |
3.6W max power over full range of voltage and temperature. See caution note below |
|
| Input Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | Referenced to GND |
| Maximum Voltage | Vmax | 4 | V | |||
| Surge Current | Isurge | TBD | mA | Hot plug above steady state current. See caution note below | ||
Caution: Power consumption and surge current are higher than the specified values in the SFP MSA
Product Pictures
Outline Dimensions (mm)
Compatibility
Certificates
FAQ
