|
| MOQ: | 1 piece |
| Standard Packaging: | 10pcs/plastic bag, 500pcs/carton |
| Delivery Period: | Within 1-3 work days |
| Payment Method: | L/C, T/T, Western Union,Credit Card |
| Supply Capacity: | 10,000 pcs per month |
10G/5G/2.5G/1G Copper RJ45 30m 10G-T SFP+ Cisco Compatible
SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA).
They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS pin for link indication. If pull up SFP's TX_DISABLE pin, PHY IC be reset.
Features
Cable Length
| Standard | Cable | Reach | Host Port |
| 10Gbase-T | CAT6A | 30m | XFI |
| 5Gbase-T/2.5Gbase-t | CAT5E | 50m | 5GBase-R/2.5GBase-X |
| 1000base-T | CAT5E | 100m | 1000base-FX |
Optical Parameters
| Parameter | Symbol | Min. | Typical | Max. | Units | Notes/Conditions |
| Supply Current | Is | 320 | 375 | mA | 1.2W max power over full range of voltage and temperature. See caution note below | |
| Input Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | Referenced to GND |
| Surge Current | Isurge | 30 | mA | Hot plug above steady state current. See caution note |
Low-Speed Signals
| Low-Speed Signals, Electronic Characteristics | |||||
| Parameter | Symbol | Min | Max | unit | Notes/Conditions |
| SFP Output LOW | VOL | 0 | 0.5 |
V |
4.7k to 10k pull-up to host_Vcc, |
| SFP Output HIGH | VOH | host_Vcc -0.5 | host_Vcc + 0.3 |
V |
4.7k to 10k pull-up to host_Vcc, |
| SFP Input LOW | VIL | 0 | 0.8 | V |
4.7k to 10k pull-up to Vcc, |
| SFP Input HIGH | VIH | 2 | Vcc + 0.3 | V |
4.7k to 10k pull-up to Vcc, |
High-Speed Electrical Interface
| High-Speed Electrical Interface Transmission Line-SFP | ||||||
| Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions |
| Line Frequency | fL | 125 | MHz |
5-level encoding, per |
||
| Tx Output Impedance | Zout,TX | 100 | Ohm |
Differential, for all |
||
| Rx Input Impedance | Zin,RX | 100 | Ohm |
Differential, for all |
||
| High-Speed Electrical Interface, Host-SFP | ||||||
| Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions |
|
Single ended data input |
Vinsing | 250 | 1200 |
mV |
Single ended | |
|
Single ended data output |
Voutsing | 350 | 800 | mV | Single ended | |
| Rise/Fall Time | Tr,Tf | 175 | psec | 20%-80% | ||
| Tx Input Impedance | Zin | 50 | Ohm | Single ended | ||
| Rx Output Impedance | Zout | 50 | Ohm | Single ended | ||
Products Show
Factory Show
FAQ
Q: Are you a manufacturer or a trading company ?
A: We're professional manufacturer of Copper RJ45 Module, providing one-stop OEM & ODM service to all partners all over the world.
Q: Are your products conforming to our standards ?
A: Yes, our products can pass the testings as you require, e.g.: CE, RoHS, ISO9001.
Q: How do you control the quality ?
A: We have perfect QC system (IQC, IPQC, FQC, OQC team), professional product engineers and continuous improvement system.
Q: What’s the product warranty?
A: We offer 12 months guarantee.
|
|
| MOQ: | 1 piece |
| Standard Packaging: | 10pcs/plastic bag, 500pcs/carton |
| Delivery Period: | Within 1-3 work days |
| Payment Method: | L/C, T/T, Western Union,Credit Card |
| Supply Capacity: | 10,000 pcs per month |
10G/5G/2.5G/1G Copper RJ45 30m 10G-T SFP+ Cisco Compatible
SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA).
They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS pin for link indication. If pull up SFP's TX_DISABLE pin, PHY IC be reset.
Features
Cable Length
| Standard | Cable | Reach | Host Port |
| 10Gbase-T | CAT6A | 30m | XFI |
| 5Gbase-T/2.5Gbase-t | CAT5E | 50m | 5GBase-R/2.5GBase-X |
| 1000base-T | CAT5E | 100m | 1000base-FX |
Optical Parameters
| Parameter | Symbol | Min. | Typical | Max. | Units | Notes/Conditions |
| Supply Current | Is | 320 | 375 | mA | 1.2W max power over full range of voltage and temperature. See caution note below | |
| Input Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | Referenced to GND |
| Surge Current | Isurge | 30 | mA | Hot plug above steady state current. See caution note |
Low-Speed Signals
| Low-Speed Signals, Electronic Characteristics | |||||
| Parameter | Symbol | Min | Max | unit | Notes/Conditions |
| SFP Output LOW | VOL | 0 | 0.5 |
V |
4.7k to 10k pull-up to host_Vcc, |
| SFP Output HIGH | VOH | host_Vcc -0.5 | host_Vcc + 0.3 |
V |
4.7k to 10k pull-up to host_Vcc, |
| SFP Input LOW | VIL | 0 | 0.8 | V |
4.7k to 10k pull-up to Vcc, |
| SFP Input HIGH | VIH | 2 | Vcc + 0.3 | V |
4.7k to 10k pull-up to Vcc, |
High-Speed Electrical Interface
| High-Speed Electrical Interface Transmission Line-SFP | ||||||
| Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions |
| Line Frequency | fL | 125 | MHz |
5-level encoding, per |
||
| Tx Output Impedance | Zout,TX | 100 | Ohm |
Differential, for all |
||
| Rx Input Impedance | Zin,RX | 100 | Ohm |
Differential, for all |
||
| High-Speed Electrical Interface, Host-SFP | ||||||
| Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions |
|
Single ended data input |
Vinsing | 250 | 1200 |
mV |
Single ended | |
|
Single ended data output |
Voutsing | 350 | 800 | mV | Single ended | |
| Rise/Fall Time | Tr,Tf | 175 | psec | 20%-80% | ||
| Tx Input Impedance | Zin | 50 | Ohm | Single ended | ||
| Rx Output Impedance | Zout | 50 | Ohm | Single ended | ||
Products Show
Factory Show
FAQ
Q: Are you a manufacturer or a trading company ?
A: We're professional manufacturer of Copper RJ45 Module, providing one-stop OEM & ODM service to all partners all over the world.
Q: Are your products conforming to our standards ?
A: Yes, our products can pass the testings as you require, e.g.: CE, RoHS, ISO9001.
Q: How do you control the quality ?
A: We have perfect QC system (IQC, IPQC, FQC, OQC team), professional product engineers and continuous improvement system.
Q: What’s the product warranty?
A: We offer 12 months guarantee.
